Selenium improves physiological responses and nutrient absorption in wheat (Triticum aestivum L.) grown under salinity

Abstract

Salinity is a serious limiting factor for crop growth and production. The present study was conducted to investigate the response of wheat grown at salinities of 0.12, 0.30 and 0.60?S?m^?1 on soil supplemented with 0, 0.5, 1 and 4?mg?kg^?1 Se as selenite. Chlorophyll a and b, carotenoid contents, Fe, Zn and Se in shoots as well as shoot dry weight were negatively affected by increased salinity. Se had a dual effect: at 0.5?mg?kg^?1, chlorophyll b, proline, and shoot Fe content were increased, catalase activity was stimulated; there was no effect on Zn content and shoot dry weight. At the two higher concentrations, Se led to decreases in chlorophyll content, nutrient concentration, and shoot dry weight. Thus, moderate addition of Se to soil could be a strategy to improve physiological responses and micronutrient status in wheat under salinity stress.     

Photodegradation of an azo dye by silver-doped nano-particulate titanium dioxide

The synthesis of silver doped nano-particulate titanium dioxide (Ag/TiO₂) using a microemulsion method and an investigation of its photocatalytic activity for the degradation of Acid Red 27 in distilled water under UV-irradiation is reported. The prepared Ag/TiO₂ is characterized using transmission electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy. The size of the Ag nanoparticles is around 5–15?nm, with almost uniform distribution on the TiO₂ particles. The efficiency of the photocatalytic process is evaluated to establish the optimum conditions, found to be at 2?wt% of Ag loading on TiO₂, catalyst dosage of 400?mg?L^?1, and calcination temperature of 300°C. Complete decolorization of the dye solution on Ag/TiO₂ was observed in 20?min of UV irradiation in the optimum conditions.     

Effect of Thermo-Mechanical Degradation of Polypropylene on Hygroscopic Characteristics of Wood Flour-Polypropylene Composites

In this research, the influence of thermo-mechanical degradation of polypropylene (PP) on water absorption and thickness swelling of beech wood flour–PP composites were studied. For this purpose, a virgin PP was thermo-mechanically degraded by two times extrusion under controlled conditions. The results showed that the melt flow index, water absorption and thickness swelling of PP significantly increase by extrusion and re-extrusion. The virgin PP and degraded polypropylene were compounded with wood flour (at 60% by weight wood flour loading) in a counter-rotating twin-screw extruder in presence or absence of MAPP to produce wood flour–PP composites. From the results, the composites containing recycled PP exhibited higher water absorption and thickness swelling. The use of MAPP decreased water absorption and thickness swelling in composites made of virgin or recycled PP.     

Acute toxicity of potassium permanganate to Caspian roach Rutilus rutilus caspicus in two size classes and under different aeration conditions

Caspian roach, Rutilus rutilus caspicus, might experience potassium permanganate (PM) toxicity, because it is common and widely used disinfectant in fish rearing and propagation centers in Iran. Thus, acute toxicity (24-h-LC₅₀) of PM was determined on Caspian roach in two size classes (small and large groups), under aerated and non-aerated conditions, using static non-renewal system. 24-h-LC₅₀ for PM in Caspian roach was 3.2, 3, 3.2, and 2.8?mg?L^?1 in large-aerated, large-non-aerated, small-aerated, and small-non-aerated groups, respectively. Results indicated that aeration was led to decrease in PM toxicity, regardless of size class. However, large fish showed more tolerance to PM toxicity compared to small ones, under non-aerated condition. It is concluded that aeration could decrease the toxicity of PM that seems to be due to the increase in PM degradation, derived from increase in water turbulence. It is suggested that 96-h-LC₅₀ may be more suitable to determine the effects of fish size on PM toxicity than 24-h-LC₅₀.     

Bioremediation of toxic metals mercury and cesium using three types of biosorbent: bacterial exopolymer,gall nut,and oak fruit particles

Cesium and mercury are two mono-valent elements which can be found in toxic industrial, medical, and nuclear wastes. Their presence in the environment has deleterious effects on the ecosystem, living organisms including humans. Due to the chemical nature of these metals, bioremediation by conventional methods is more difficult to achieve compared to other metals. In this study, we used three biosorbents (oak powder, gall nut, and bacterial exopolymer) for the bioremediation of Hg and Cs. Bio-polymer was produced in the GMS mineral broth. Synthetic wastes of Hg(NO₃)₂ and isotope Cs-133 as the single-metal solutions were used. The biorefining process was carried out in glass columns, made of Pyrex, with dimensions 20?×?7/2?cm² with a V-shaped bottom. The samples were analyzed using atomic absorption. The experimental results showed that eliminated metal percent by oak powder, gall nut, and bacterial exopolymer were, respectively, of 94.8%, 96%, and 13.8% for Hg and 7.8%, 4.4%, and 69.4% for Cs. The tests revealed that Ca⁺⁺, when used as flocculant, played a key role in both biosorption and bio-precipitation rates. Consequently, it was concluded that the investigated biosorbents could be use as an integrated biosorption system for the refinement of mixed wastes.     

Numerical simulation of airflow and particle distributions with floor circular swirl diffuser for underfloor air distribution system in an office environment

Environmental Science and Pollution Research - In the present study, an underfloor air distribution (UFAD) system with a circular swirl diffuser was simulated in an office room using a...     

Performance evaluation of a continuous flow photocatalytic reactor for wastewater treatment

A novel photocatalytic reactor for wastewater treatment was designed and constructed. The main part of the reactor was an aluminum tube in which 12 stainless steel circular baffles and four quartz tube were placed inside of the reactor like shell and tube heat exchangers. Four UV–C lamps were housed within the space of the quartz tubes. Surface of the baffles was coated with TiO₂. A simple method was employed for TiO₂ immobilization, while the characterization of the supported photocatalyst was based on the results obtained through performing some common analytical methods such as X-ray diffraction (XRD), scanning electron microscope (SEM), and BET. Phenol was selected as a model pollutant. A solution of a known initial concentration (20, 60, and 100 ppmv) was introduced to the reactor. The reactor also has a recycle flow to make turbulent flow inside of the reactor. The selected recycle flow rate was 7?×?10^?5 m³.s^?1, while the flow rate of feed was 2.53?×?10^?7, 7.56?×?10^?7, and 1.26?×?10^?6 m³.s^?1, respectively. To evaluate performance of the reactor, response surface methodology was employed. A four-factor three-level Box–Behnken design was developed to evaluate the reactor performance for degradation of phenol. Effects of phenol inlet concentration (20–100 ppmv), pH (3–9), liquid flow rate (2.53?×?10^?7?1.26?×?10^?6 m³.s^?1), and TiO₂ loading (8.8–17.6 g.m^?2) were analyzed with this method. The adjusted R ² value (0.9936) was in close agreement with that of corresponding R ² value (0.9961). The maximum predicted degradation of phenol was 75.50 % at the optimum processing conditions (initial phenol concentration of 20 ppmv, pH?～?6.41, and flow rate of 2.53?×?10^?7 m³.s^?1 and catalyst loading of 17.6 g.m^?2). Experimental degradation of phenol determined at the optimum conditions was 73.7 %. XRD patterns and SEM images at the optimum conditions revealed that crystal size is approximately 25 nm and TiO₂ nanoparticles with visible agglomerates distribute densely and uniformly over the surface of stainless steel substrate. BET specific surface area of immobilized TiO₂ was 47.2 and 45.8 m² g^?1 before and after the experiments, respectively. Reduction in TOC content, after steady state condition, showed that maximum phenol decomposition occurred at neutral condition (pH?～?6). Figure

The schematic view of the experimental set-up     

The impact of iodinated X-ray contrast agents on formation and toxicity of disinfection by-products in drinking water

The presence of iodinated X-ray contrast media (ICM) in source waters is of high concern to public health because of their potential to generate highly toxic disinfection by-products (DBPs). The objective of this study was to determine the impact of ICM in source waters and the type of disinfectant on the overall toxicity of DBP mixtures and to determine which ICM and reaction conditions give rise to toxic by-products. Source waters collected from Akron, OH were treated with five different ICMs, including iopamidol, iopromide, iohexol, diatrizoate and iomeprol, with or without chlorine or chloramine disinfection. The reaction product mixtures were concentrated with XAD resins and the mammalian cell cytotoxicity and genotoxicity of the reaction mixture concentrates was measured. Water containing iopamidol generated an enhanced level of mammalian cell cytotoxicity and genotoxicity after disinfection. While chlorine disinfection with iopamidol resulted in the highest cytotoxicity overall, the relative iopamidol-mediated increase in toxicity was greater when chloramine was used as the disinfectant compared with chlorine. Four other ICMs (iopromide, iohexol, diatrizoate, and iomeprol) expressed some cytotoxicity over the control without any disinfection, and induced higher cytotoxicity when chlorinated. Only iohexol enhanced genotoxicity compared to the chlorinated source water.